1.1 MAIN SCREEN
After the VR3T has performed a system check when turned on the MAIN SCREEN will appear. This screen
displays important information about the battery voltage, settings and the model selected.
Represents a fully charged battery. this will start at 11.0 or higher depending
on the type of AA battery that is being used to power the transmitter (Alkaline/
Rechargeable NIMH). NOTE: When the battery has dropped below 8.4v an
alarm will sound.
The current position of the steering and throttle trims setting are displayed.
Displays the current Steering Dual Rate value (see 1.3 - ST D/R Steering Dual Rate)
Displays the TH HOLD status as ON or OFF
(see 2.4 SYSTEM/HOLD (TH. HOLD)
Displays the transmitting mode
(see 2.1 SYSTEM / MOD (MODULATION)
1) Press ENTER to see the FUNCTION MENU
2) Use the
+/- KEYS to highlight the EPA box and
press
ENTER
3) Press ENTER to select a value
4) Use the
+/- KEYS to change the value
5) Press
EXIT to save and return to FUNCTION
MENU, press
EXIT again to return to the
Main Screen
NOTE: When using an electronic speed control
(ESC) set the Throttle EPA values to 120%. This
will allow the ESC to calibrate itself to the VR3T
and make the response and feel of the throttle as
smooth as possible.
End Point Adjustment (EPA) - Used to set the maximum travel of the desired function from 0-120%. Can be
used to set both directions of travel (fwd/bk & lft/rt) to adjust the overall range of movement or value. Can be
used in conjunction with Dual Rate (see also Dual Rate)
PROGRAMMING MODE
To enter programming mode from the Main Screen press the ENTER button on the transmitter. To save and
exit from the sub menu press EXIT.
1.2 FUNCTION / EPA (END POINT ADJUSTMENT)
SERVO
LEFT
BACK
RIGHT
FWD
TERMS: F-FORWARD, B-BACK, ST-STEERING, TH-THROTTLE, AUX-AUXILLIARY
2
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern