VENOM VR3T Bedienungsanleitung PDF herunterladen (Seite 3)

1) Press ENTER to see the FUNCTION MENU

2) Use the

+/- KEYS to highlight the D/R box and

press

ENTER

3) Press ENTER to select a setting

4) Use the

+/- KEYS to change the value

5) Press

EXIT to save and return to FUNCTION

MENU, press

EXIT again to return to the Main

Screen

1.3 FUNCTION / ST D/R (STEERING DUAL RATE)

ST D/R - Steering Dual Rate (ST D/R) - Creates two overall steering travel presets. Set the primary value

POS0 to an equal or lesser percentage of the steering EPA. Set the secondary value POS1 to a lower percent-

age than the primary value POS0. Use the ST D/R button on the grip of the transmitter to select between the

two preset values. Example, if the EPA steering value is 100% then set POS0 to 100% (or less) and set POS1

to 80%. When the ST D/R button is pressed the steering travel value changes between 100% and 80% This

allows you to change the amount of steering while driving.

SERVO

LEFT

BACK

RIGHT

FWD

TERMS: POS- POSITION

1.4 FUNCTION / TRIM (SUB TRIM)

The SUB TRIM feature allows for a function to be adjusted in 1% increments from the center of travel point

which is 0%. Use this to make small adjustments and to center a servo during assembly. While driving, using

the external TRIM BUTTONS for Steering (ST) and Throttle (TH)

1) Press ENTER to see the FUNCTION MENU

2) Use the

+/- KEYS to highlight the TRIM box and press ENTER

3) Press ENTER to select a setting

4) Use the

+/- KEYS to change the value

5) Press

EXIT to save and return to FUNCTION MENU, press EXIT again to return to the

Main Screen

TERMS: ST-STEERING, TH-THROTTLE.

1 2 3 4 5 6 7 8 ... 11 12

Keine Kommentare

VENOM VR3T Bedienungsanleitung Seite 3